- My AccountDon't have an account yet? Sign up now!
- 00,00 €
You are using an unsupported browser - the site is running in restricted mode. For proper operation of the site, use, for example, mozilla Firefox, google Chrome, MS Edge and the like.
You are using an unsupported browser - the site is running in restricted mode. For proper operation of the site, use, for example, mozilla Firefox, google Chrome, MS Edge and the like.
The manipulator, together with the feeders and the setting table, forms a compact, powerful mounting system for mounting PCB prototypes or for manual PCB mounting of small series.
It is supplied without the DH10 feeders and dosing head, which are optional accessories.
The easy movement of the arm in the X and Y axes allows for comfortable picking of components from the feeders and their placement over the entire work surface. Precise guidance of the placing head in the Z axis means a perpendicular and fine placement of the component into the paste, starting from chip size 0201. The head guide knob simultaneously serves to rotate the needle about its axis.
There is also a small but powerful light source and a vacuum switch integrated in the head. Gently squeezing the placing head is understood as picking-up components and deep squeezing as placing. Vacuum pump with regulation is also included in standard shipment.
A miniature CCD camera is built into the head for mounting small size 0201 chips as well as for precise positioning of very fine pitch ICs. The camera has 2 positions and displays either a setting needle or a dosing nozzle. The magnified image at a low angle is displayed on a large 20 " PC monitor.
With an additional dosing head, solder paste, glue or other media can be applied to the PCB. Precise guiding of the hand with the cartridge allows to dispense accurate quantity in the right place.
Standard delivery includes: Manipulator table with movable arm and head with lighting and camera, 20 '' monitor, 230/12 V power supply, vacuum pump, 3 magnetic PCB holders, suction cups, spare needles for vacuum pipette, operating instructions.
Manipulator dimensions (l / w / h): 790 x 390 x 170 mm
Max. size with feeders: 1140 x 650 mm
Arm movement in x / y / z axes: 470 x 230 x 15 mm
Working area max: 350 x 210 mm
Head power supply: Adapter 12 V, 800 mA
Input Power for vacuum pump: 230 V, 6 W
Video camera:
Viewing angle: 78 °
CCD sensor: 1/4 "- 8 Mpix
Video resolution: 1080p30 - Full HD
Monitor
Display dimensions: 19,5" (50 cm) widescreen 16: 9
Resolution: 1600 x 900 pixels
Dimensions with stand: 462 x 353 x 189 mm
The following accessories are ordered separately:
FDT-108 Combined feeder for 10 pcs of 8 mm tapes
FDT-108H Holder for 10 reels of FDT-108 feeder
FDS-8 Combined feeder for 5 IC tubes of type SO-8 ICs
FDS-16 Combined feeder for 5 tubes of type SO-16 ICS
580047 Suction cup 3,0 mm
580049 Suction cup 6,5 mm
MAN-32-VLC
Datasheet (650.28 KB) |