Powerful extraction for the workbench EASY ARM 1 incl. connection cable for connection to an i-CON VARIO.
Ersa solder fume extraction units are based on
over 15 years of experience in process air cleaning
They stand out by a high suction power and an
efficient filter performance combined with super silent operation. Exhaust volume per arm is
110 m³/h. Both the EASY ARM 1 and EASY ARM 2
are equipped with filters that clean the process
air in three stages: The pre-filter absorbs dust
and big particles. The combined filter separates
micro particles which occur during soldering and
absorbs dangerous gas molecules in the incorporated activated carbon filter.
The operator can choose between a system with
one exhaust arm – the EASY ARM 1 – and a unit
with two exhaust arms – the EASY ARM 2. Both
units can be mounted individually by means of
their table clamp. Exhaust power is set independently for each extraction arm at the touch of a
button. The EASY ARM 1 and EASY ARM 2 use
an identical pre-filter and combined filter. Optical and acoustical signals inform the operator
when filters have to be exchanged. A wide range
of exhaust arms and nozzles for all applications
are available so that the user will find the proper
solution for his requirements.
For energy saving purposes and to extend filter
lifetime, both units can be connected with Ersa
i-CON soldering stations or a standby switch. In
this way, the extraction unit is only working whilst
the attached soldering station is in operation,
stopping as soon as the soldering station goes
into standby mode.